Oil Water Separator

In numerous industrial environments, oil and water mix and flow together. Prior to water reuse, treatment or discharge, oil must be separated and removed—and our oil-water separator is designed for this exact purpose.

Water first enters the inlet compartment to initiate oil separation: baffles reduce water flow velocity, making suspended solids settle out. It then moves to the separation chamber, where coalescing media blocks bind oil droplets in the water together, increasing their size until they separate from the water. this coalescing media effectively removes nearly all free and dispersed non-emulsified oils, and then meets the discharge requirements of most municipal sewer systems.

Our oil water separator efficiency can achieve up to 99%, effectively removing virtually all free and dispersed non‑emulsified oils from the process fluid, and reducing the residual oil concentration in the effluent to below 6 ppm.

Applications:

• Coolant System
• Industrial Washing
• Factory Sump Tank

Model number	Flow rate	Reference L*W*H(inch)
VWS 7G	10 GPM	48*24*36
VWS 15G	15 GPM	60*36*36
VWS 25G	24 GPM	72*48*36
VWS 35G	35GPM	72*48*48
VWS 45G	45GPM	72*60*48

Tank material: steel or stainless steel
Coalescing media material: PP, stainless stell, pvdf

Float oil collector

Designed to float on the water surface, this triple-float oil skimmers remove non-emulsified oils from the surface. Constructed of stainless steel, they can be configured as either rigid or hinged to fit small manhole openings in wastewater storage tanks:

the over all demension can be 320/400mm, and the ball diameter can be 110/150mm, and the outlet connect size can be 1/2″, 3/4″, 1″, 1.5″, and other assemble accessories are available, don’t hesitate to contact us for inquiry the demensions.